Search the forum,

Discuss Can someone please name this valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

oogzy

Hi, we have a trailer mounted shower unit and the boiler is leaking water from this valve that sits just below the boiler on the mains water in side. I have tried tightening the black plastic screw but this does not cure the problem and i need to order a new one.
To order it i need to first know what it's called :eek:)
Can someone please let me know if at all possible.
Pics attached - before and after removal.

Many thanks in advance


Dean
 

Attachments

  • Photo138.jpg
    Photo138.jpg
    77.1 KB · Views: 61
  • Photo139.jpg
    Photo139.jpg
    95.3 KB · Views: 49
It is a water inlet valve for a chaffoteaux corvec water heater

it will be the 'o' ring on spindle leaking
 
Last edited by a moderator:
Thanks Puddle
It is actually connected to a Britony II boiler - will it still be the same spec?
 
Well done Puddle, cos I didnt have a clue just by looking at it :D
 
Thanks all...
eventually found and ordered it :)
Listed as 'service tap'.

Thanks for all your help
 
It's chaffoteaux corvec water heater... My brother used that.
 
Status
Not open for further replies.

Reply to Can someone please name this valve in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All, I have a leaking drain valve off the CW inlet on a Range Cylinder. Am I right in thinking I have to empty the Cylinder below the CW inlet to change the valve? To isolate cold water to the tank to prevent refill, should I just lock off the 1 stop CW inlet or all 3 red stops? Turn mains...
Replies
7
Views
841
newbie184
N
T
Please advise me. I am a disabled pensioner. I had a wet room fitted just over a year ago using a local authority grant. Builder was employed by local authority. I had no say in who carried out the work. I have called the builder out under the guarantee several times for water leaks. The shower...
Replies
0
Views
263
TheCatWhoNeedsaHotShower
T
Good morning I installed a Harvey’s water softener recently. Have a semi detached property with 3 showers and a 2 toilets with a mega flow cylinder 25mm mains pipe work with 22mm onwards. I put the softener before the prv which was pre installed with the unvented cylinder as the rep said...
Replies
1
Views
565
J
    • Like
I have an Arteform shower valve in my bathroom - top lever for the main shower head, middle for the handheld hose and bottom is the thermostatic control. The hot was not getting hot enough recently so (under instructions from the manufacturer) I removed the allen key valves bottom left and right...
Replies
1
Views
363
We are in a new build (2 years) and the bar shower value on-off bit is jammed. I want to replace it myself as can't afford a plumber. The old one is is Aqualisa and has on/off on right and temperature on the left. I have purchased a replacement bar shower valve with the on/off on left and...
Replies
2
Views
642
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock