Search the forum,

Discuss magnacleanse in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I got a demo jar in mine :tongue3:

Was it for a limited time only or did the packaging monkey drop it in by mistake I wonder ?
 
I got a demo jar in mine :tongue3:

You have no idea how much better that makes me feel. I was certain that they came with demo jars - and yours wasn't that long ago Nostrum.

I was starting to think that I was losing my marbles.

Ray
 
Bearing in mind what Sam said in post 73, would you mind having a look in your unopened one Killy Bing, and seeing if there is one in there?

Ray
 
Hold fire, will see if i can make adey cry and send me one out for free first.

i managed to get 50 seal kits out of them easy enough....

they do seem very keen to give away freebies with a bit of leaning on
 
Bearing in mind what Sam said in post 73, would you mind having a look in your unopened one Killy Bing, and seeing if there is one in there?

Ray

Will go open it up.

haha riley, i tend to be able to get discounts or freebies out of pretty much everyone.
phex show i walked away with two bags and a rucksack full
 
Will go open it up.

haha riley, i tend to be able to get discounts or freebies out of pretty much everyone.
phex show i walked away with two bags and a rucksack full

loving your work when I go to shows I grab all the freebies going then get home n look at it and think wtf bin 3/4 as it's tat :wink:
 
Was there a demo jar in your's Matt, or did you blag yours from Adey?
 
Mine was bought in October, Ray. November if Adey are reading this as I had to bend the truth slightly to get my free Pro 2 and chemical pack.
 
What does the seal kit include? Does it fit the pro 2 and original?

The large o ring for the screw down body, pretty sure its good for both.
and a small o ring for the bleed i think, will have a look.

ring up, say you have fitted x amount and some are leaking.
 
Status
Not open for further replies.

Reply to magnacleanse in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
450
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
136
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock