Search the forum,

Discuss Holidaying in Yorkshire... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

B

Burger

So I’m currently on a short holiday with family in Yorkshire in a caravan park. Being a saddo, first thing I check out is the boiler an Ariston - must say very impressed. It might be the brand of caravan, but usually have a Morco - enough to put me off combi’s for life. I usually stay in North Wales, but I wanted a change. Anyone else dealt with Morco? I’ve only ever been a user of them.
 
I have a habit of doing things like. Where abouts in Yorkshire have you gone, I'm heading up there for a week on Friday.
 
morco spares are way overinflated
 
Any thoughts on what they’re like as a boiler - my experience of them seems to be they are rubbish.

they do a job very old fashioned the new ones are rebadged ideals
 
You need a special passport to enter and leave Yorkshire , you are most welcome .
Have a quick wander around Gargrave if you have time , I used to cause havoc there when I was a little lad .
 
In my opinion morco are not the easiest to work on (or might just be the small cupboards they are fitted in) parts are too expensive and they used to be a nightmare to get hold of although dont think they are as hard to get hold of now.

Luckily enough I think caravans are moving away from them as the last couple I've stayed in have not been morco 1 was an ariston and cant remember what the other was.
 
tfj, In the Masons Arms or the Old White Swan by any chance? Or down by the river on the stepping stones?
 

Reply to Holidaying in Yorkshire... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
140
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
213
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock