Ive looked at the tech specs and it seems that the REMS has a lower flow rate but higher pressure at 5.5 bar. the Kamco has a higher flow rate so i understand that will be best for flushing a dirty system, however its maximum pressure of flow is under 2 bar. I wish to use a mashine for...
I've been trying to get hold of one of these for the last week or so for a customer. Almost every supplier that sells them don't have any at the moment. So far I've only come across two that did. One refunded after two days without any explanation. The other I placed an order with I've not had...
Hi, got a porcalenosa mixer shower that i need to replace the valve on it. Not sure what tool is used on it as it looks unusual. please see photos with details
many thanks
Has anyone bought one yet? Going to buy one? Or even leasing one with a view to buy.
Probably crazy to buy one now as the price is only going to come down I guess.
Thoughts?
Cheers
hello all
I am looking at getting my kit started as my boss has given me loax Ash and I have some. Does anyone have any tips on wefd to head to looking at all hand tools and power tools so was hoping to get a good deal thanks
I bought these (not the ones in the image, what they sent) Ratchet Tool for 0.5mm²-10mm² Ferrules - https://www.tlc-direct.co.uk/Products/DVDCER510.html, however I had to return them as the crimps kept getting stuck, nearly broke the wire getting it out. I was considering these Ferrule Kit -...
Hi All
I'm after an inspection camera, there has been times when I've needed to look down a drain, or check a leak under a shower, or look under a floor for a pipe run, seen chap ones which attach to your phone, but I suspect these might be rubbish, endoscopes are not long enough.
There is...
I bought a Hozelock tap to hose fitting, though it doesn't fit the tap.
The diameter appears to be 22mm.
I desperately need a fitting for a hose to water some plants, as running back and forth with a watering can seems so unnecessary.
Can anyone point me to what I'm looking for...
Ordered a rip off makita drill a while back and used it for the first time today, its solid and performs better than my apprentices ryobi so if anybody is on a tight budget figured this might help you out. Just be warned it took ages to get here as the company ships them from china, they're...
Hi, does anybody know what gas is in the freeze master's pipe freezing units, mine could do with a check and a top up. My local aircon branch said they might be able to re-gas the unit if it contained a gas they had. Thanks in advance.
Hi there
I just bought a Novopress ACO103. I attached a picture of the machine and the jaws. Can someone tell me what fittings can be used with these Jaws? Im new to press and these seems to be alot of different names. Connex banninger, m press, v profile etc
Any help you can and links would...
Evening All,
I've just had a mare of a day digging up a kitchen floor trying to re-route pipes. Can anyone recommend some kind of pipe detector that will detect pipes in concrete?
Jock
After the plumber changed the expansion vessel, the boiler was leaking even worse leading it to being condemned. It is quite old, so I suspect it was on its last legs anyway. Still, he was banging it quite a lot, and I just wanted to check there was a good reason for him to do so. Thanks.
Does anyone out there have experience of a water CONDITIONER - I don't want a water softener installed and I wondered if these really work or just a gimmick?
I would appreciate any information/reviews from either owners or plumbers please.
Hi, I'm in the process of buying the fittings for my new bathroom and I'm trying to find a combo toilet/ vanity unit. The one i'm looking for is the darky navy one the second image on the gallery on mabathrooms .co.uk . I spoke to the guy who owns ma bathrooms and he said that the customer...
Hi
Scenario,..... I go to install my new Washing machine and the little shut off valve has Seized solid and i can not access the mains water shut off valve,
In the past i would bend the fill pipe in half and put a jubilee clip on the bent section while im working on it.
Is there a specific...
Grohe kitchen mixer with new - fangled tool free fixing. Had 2 now, both with problems on the clutched plastic backnut - just keeps slipping and turning, not gripping - tap is about as solid as a fresh mackerel.
They are trying to make it easier for diy / handyman but usually it's the water...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.