Search the forum,
Questions and plumbing advice in the Oil and Solid Fuel Forum - .

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

Hi We have a vented oil-fired heating system with a coal fire back boiler, this is going to be changed to a sealed pressurized system tomorrow and I believe, they are decommissioning the back boiler. I have only discovered today there is no access to the water jacket, so will it be good enough...
Replies
5
Views
521
R
  • Question
Seized baffles - can anyone give advice how to free them ? Worcester Camry boiler
Replies
2
Views
437
Heatslave II 25/32 water leak from PHE Inlet block. When DHW PRV fitting was removed a white flat seal/washer was found in 3 pieces. This seal is not listed on any diagram. It sits ahead of the rubber o ring item 45 on drawing and has has the same ID and OD as the oring but is made from white...
Replies
17
Views
2K
C
Hi all, all new to this breakdown life, currently waiting on getting on a training course, so just been relying on technical and instructions since I passed my oftec. The current boiler is a two pipe line off a tiger loop. I went to a Grant vortex boiler last week where the boiler went into...
Replies
0
Views
1K
CJAY40
C
L
Camray 5 (90A) (20 year old) oil boiler, had a noisy fan on the boiler so investigated, just a bit of dirt in the casing however, having removed the burner unit I replaced the Burner Nozzle no problem, old was very dirty and sooty. Found the boiler wouldn't fire up. SO rather than than mess...
Replies
3
Views
966
Hello all. I'm looking for advice to help my heating engineer fix my problem! He actually installed the unit. It’s a 3 year old oil boiler, a Firebird with C26 Riello burner. It’s been running fine since installation, but went into Lockout a couple of weeks ago. The engineer first changed the...
Replies
20
Views
5K
Hello all, we just moved into a house with a oil Rayburn range as the primary source of heating, but it has been off for about 10 years. We havent had any luck finding an engineer or knowledgeable person due to our extremely remote location and covid 19. the problem seems to be that as oil...
Replies
3
Views
2K
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock