Search the forum,
Questions and plumbing advice in the Central Heating Forum - Also see on the electrical forum: Central Heating Systems..

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

  • Question
My daughter's place has a small water leak on a ground floor radiator valve. The radiator pipework is small diameter.i.e 8 or 10 mm. A plumber is coming back in a day or so to make necessary repairs. I am a little concerned as the house has a Boilermate 2000 on the upper floor and the...
Replies
3
Views
363
I have a "Firebird Envirogreen Condensing Combi Oil Boiler 26kW" a part has went and I can't find it anywhere, I was at every plumbers merchant near me but they all need to ring Firebird who are closed till next week. I wonder if anyone can help me find this part please? It's a pressure sensor...
Replies
2
Views
390
hi. anyone used one of these before.. need to connect a hose from a condense pump to a w/c pan connector..these are for connection to soil pipe so im wandering if the wall of the pan connector maybe too thin?..best option is change pan connector to one with a boss on it but the toilet is stuck...
Replies
1
Views
362
Anyone know how to clear a f70 fault on a british gas 330+ boiler
Replies
6
Views
576
I
Velocity Rogue 5.0 for sale plus testo 760-1 digital multimeter. I purchased the bag 2nd hand (I’ve never used it) and the Testo new after completing gas course. £100 for both. Please email me if interested
Replies
0
Views
261
ITEMS FOR SALE
I
M
  • Question
Hello - I have a Ideal 35kw combi gas boiler. Everything was fine until I switched the heating on for the first time this year. Then I got a L2 Ignition lockout error, and resetting the boiler doesn't fix it. The gas is definitely on, and the pressure is fine - any ideas? Thank you!
Replies
2
Views
440
Grateful for any advice regarding this problem. Flat about to be let and main heat exchanger in Worcester Bosch Greenstar 24i Junior has failed! I can replace with identical model (I think!) but would prefer to use GC2000iW C if possible. Question is, can the 2000 fit directly onto the 24i...
Replies
9
Views
716
Hi, Have a Valliant Ecotec Plus 637 system boiler that is showing no error codes and S.0 (no demand for heat), but it is not heating. Have checked that it is receiving switched 240V heat demand from controller into PCB, so believe it's just a boiler issue. Boiler was working fine up until...
Replies
13
Views
1K
  • Question
Hi all, I have been busy renovation a house that I bought a year ago during the winter. During the summer we switch off the heating system to conserve electricity as we are not living in the house. I removed some of the radiators during the wall renovations, refitted and bled the system. As soon...
Replies
7
Views
1K
R
My bathroom underfloor heating is not working. It does work in the other rooms except bathroom. What could be reason ? I completely closed bathroom thermostat and re opened it still doesn’t respond.
Replies
1
Views
563
Deleted member 120897
D
  • Question
Hi I am thinking to replace my ageing Alpha CD24R with a Bosch equivalent, I have a few quotes which seemed fair, until today we had a company turned up, he really had a good look round. Far longer than the others, (one i had to send pictures ? And he quoted me the pics that I supplied?) He...
Replies
1
Views
417
Hi All, Has anyone ever come across this clicking noise before (see video, starts around 16 secs in)? Just bought a new house with this fitted only 2 years ago. Thanks
Replies
4
Views
596
C
I have a old glowworn hideaway boiler which has been working perfectly until a few days ago, had a engineer come out and change the thermocouple and it now ignites and stays lit.. that is until the central heating is turned on, stays on for around 10 mins and then completely cuts off. Reset...
Replies
6
Views
2K
M
  • Question
Hello, firstly I’m not a plumber! But I have just ripped out an ideal esprit 30 boiler from a house completely and safely isolated from any gas or water. I’ve undone all the joints underneath the boiler and found only the cold water inlet to have a washer. Is this correct? Or, have I dropped...
Replies
5
Views
768
We had a Gloworm Energy 7 30r Boiler fitted in Jan 22 to replace a British Gas Boiler (which was a Glowworm Rebranded ) when the heat exchanger split after 10 years. The old boiler had a pressure gauge on the fascia but this new model is not fitted with one. After it was all fitted I queried...
Replies
12
Views
2K
J
what is the best power flush machine and where can I buy it
Replies
1
Views
803
D
Baxi 105he fault code blocked condensate trap? Removed terminals disconnected the pipes undid fixings removed trap and gave it a good clean out then refitted? Boiler still showing same fault code after a lot of head scratching I changed the terminals over from there original positions on the...
Replies
0
Views
1K
David Tait
D
Hi people of this forum I have a quite unique situation, I have recently finished my college course and have applied for my GSR, the previous threads that I have read in this forum say that they would like to see a calibrated FGA, knowing this I have looked up the prices and they are way out of...
Replies
7
Views
914
Deleted member 120897
D
P
I have just had a water meter fitted and since been told I need a small expansion vessel fitted to my domestic hot water system as the meter will have a NRV in. I have also been told no I don't as my boiler is over 10meters away from the meter and any expansion will be taken up within the...
Replies
1
Views
999
I
  • Question
Hello everyone, I have a glow-worm 24ci which was working fine and has now decided that it doesn't want to heat the water. By this I mean that when the heating is turned on everything kicks in fine but when the tap is turned on nothing happens. Water pressure is fine but doesn't get hot at...
Replies
1
Views
868
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock