D
Discuss You couldn't tell this wasn't core drilled in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I did get my self a breaker to core flues just like this one ! We were doing a contract in Brixton and the walls were just over 600mm and build of 4 lay of solid bricks ! If I was to use my hilty core drill would have taking me about 5-6 hours , but with hilti breaker about 45min !!!
Rhere is nothing wrong with what I see on the picture , who ever done it could have had his core drill stolen or broken down .......
RE: The first photo.
Being overly forensic, I would say the hole was done by the block layers.
The vertical courses don't line up.
I would hesitate a guess that the plumber put a sleeve through the wall for the flue and the block layers built around the sleeve.
The sleeve was removed and the flue put through.
Could this be a possibility?
Reply to You couldn't tell this wasn't core drilled in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.