Search the forum,

Discuss Worcester greenstar intermittent fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,712
Attended this on friday heating and hotwater cut out after about two minutes , slow flash on blue light mainly on.

Reset boiler and same same, replaced flue stat and temp stat but still same fault .
 
What's the gas pressure?
 
Could the heat exchanger be blocked ?

I’ve added the fault diagram.

83B1F19A-C2A4-4BBE-805A-72FDB5D092BD.png
 
I checked most if that i thought hex could be blocked as when put it in service mode it locked out quick sharp. Mentioned it to customer and she went nuts as boilers only about 6 years old lol,,,,,,oh the joy
 

Reply to Worcester greenstar intermittent fault in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably no need for me to needlessly heat hot water. My intention was to turn the boiler off along with the mains water when going away. Now, I have heard...
Replies
1
Views
123
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
501
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock