Search the forum,

where can i get a new cartridge for this tap please

Post new thread

Discuss where can i get a new cartridge for this tap please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I

INEX

Or any idea of the make/model
 

Attachments

  • IMG_20161015_083843770.jpg
    IMG_20161015_083843770.jpg
    89 KB · Views: 38
As it has an acrylic head it is going to be old.......

You might be able to track a cartridge down, may be an old obsolete model though. Can you remove the head to see if is a generic cartridge?
 
Not many plumbers would try to even source a part for that tap, even if you do the genuine Cartridge would cost more than a new tap!
 
I think it's Ideal Standard...not sure of range....regards Turnpin:smile5:
 
standard mixer cartridge would probably fit, normally one of two sizes, held by decent merchants for a few quid
 
Status
Not open for further replies.

Reply to where can i get a new cartridge for this tap please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
301
Bp89
B
D
UK Can't get stopcock 100% closed to allow a tap repair
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
240
Chuck
C
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Stigster
Stigster
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
234
Dave Moore
D
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
338
Timmy D
T
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Contractor Talk
Plumbers' Talk
DIY Talk
Tilers Forum
Tile Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock