Search the forum,

Discuss What's this shower valve? No branding! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Tjuice

Hello all.

Quick question. Does anyone know what brand of shower valve this is (for some reason, the picture seems to turn on its side when I insert it - should show with all valve handles vertical)? There is no branding marked on it anywhere, but it seems high quality stuff. I have spent some time searching through google images to see if I can find something, but no luck.

If anyone can give me any pointers that would be really helpful.

Many thanks
20170104_211157.jpg
 
Welcome to the forums, send the picture to showerdoc.com
 
Thanks rpm.

I've found the answer! Seems as though it is a French brand called THG, based in Paris.

Now just have to see if I can get replacement parts for it...
 
Status
Not open for further replies.

Reply to What's this shower valve? No branding! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
170
S
I have a brand new, unboxed shower/wet room screen from KRION purchased from Porcelanosa UK. It is the Attica 1 model, as shown in the attached picture from their catalogue. Like on this image ->...
Replies
0
Views
97
Sebastian T
S
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
384
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
273
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
248
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock