Discuss What are people fitting to there boilers to meet the new requirement for April. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Is that a sensor that can flush the loo then? (WC).I mainly fit Viessmanns , they are all going to be delivered with a WC sensor.
I will fit the sensor, run the wire and connect it into the boiler , if the customer doesnt want it they disconnect it .
Ta da !!!!!
Is that a sensor that can flush the loo then? (WC).
How does it know when you're finished?
On a more serious note:I mainly fit Viessmanns , they are all going to be delivered with a WC sensor.
I will fit the sensor, run the wire and connect it into the boiler , if the customer doesnt want it they disconnect it .
Ta da !!!!!
On a more serious note:
Is it built in on a Viessmanns?
Is it just a case of connecting an outdoor sensor?
Don’t tell them. Just fit it as standard.Looks like I'm gunna have to fake an Internet symbol on my center brand wireless stat. Every customer I've spoken to in last two months before producing them a quote has told me they won't pay 150 extra to comply for an extra 2% eff. Can't say I blame them.
Stick with the smart stat as it clearly makes no difference. You would expect 11 years from a decent boiler at least.Anyone else read the article in Gas Engineer mag?
The one that shows the savings!
Weather comp £130 AUC (additional upfront cost)
Yearly bill saving £4
Payback time 35 years
Load comp £50 AUC
Yearly saving £4
Payback 13 years
FGHR £460 AUC
yearly saving £15
Payback 14 years
Learning thermostat/smart control AUC £190
Yearly saving £17
Payback 11 years
Your thoughts ?
For years Boilers have always had to have time and temp controls as standard of course but now you need a control that has load comp. with w WB you can meet new requirements with one of there new plug in controls. No need for weather comp or gas recovery etc... Don't think you can fit standard Honeywell wireless prog stat now sadly. Not even sure if nest and hive meet the new requirements?
A valiant rep told me it's only for combi boilers? Anyone else heard this?
Are we still talking about this?Boiler plus affects combi installs, for systems you still have to have a room stat and clock
http://registeredgasengineer.co.uk/wp-content/uploads/2018/03/Boiler_Plus_Are_You_Ready.pdf
Reply to What are people fitting to there boilers to meet the new requirement for April. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.