Discuss Water Supply from Washing Machine Feed in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Thanks, I wish I had known that at the time. Because they have the rubber O rings and they cost more, I assumed they would give a better seal so I used that one in the compression joint and the normal ones in the other joints.

There the super seal ones just for push fit fittings
 
Thanks Shaun, thats good to know. It would be helpful if the makers were to print that on the packaging.

When speedfit came out they one made that type (super seal) and they had a few claims through with compression popping off under pressure and then they brought the stnd inserts out but agree should be somewhere in big letters not for compression etc
 

Reply to Water Supply from Washing Machine Feed in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
162
Sonya K
S
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
179
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
240
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
272
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
321
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock