Search the forum,

Discuss Vaillant System Boiler- No Hot water but heating is working! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
22
Hello All.
I was wondering if i can get expert opinion from people here with the problem I have.
The Hot water is not working but heating is.

Background:
We recently moved in to our house after complete refurb. We have a Vaillant ecotec plus 624 system boiler and megaflo installed.

When we moved in we noticed that each time the hot water used to turn on the radiators would go on too. After couple of days It mainly became issue upstairs especially babies room radiator and bathroom radiator.


I tested the system by turning off all the radiators upstairs and turning on the hot water to see if anything happens to downstairs radiators. They did turn on or the pipes became hot.

When I open the radiators upstairs and downstairs and turn hot water on, only the radiators upstairs turn on.

So..

I called up the guys that installed it and explained all of this. They came Thursday had a look at motorised valve and said thats ok. They didnt have much clue and one of them then put a non retun valve in one of the pipes upstairs. (I think its from the upstairs radiator). Initially when they put the valve it started making a grunting noise as the hot water was turned on. they changed the valve and it settled.

Under the boiler the return pipe was warm.

They said this should be okay now.

Since the work they carried out I have no water. Heating is working ok. When I switch on hot water the boiler starts up but no hot water.

I went up in the loft where the megaflo is and the pipe that says 'primary flow' is cold and the primary return pipe is cold as well. There was a red tap on the return pipe which was cold i turned that and the return pipe is hot but still no hot water.

I dont know what to do and would appreciate any thoughts you all have!


Thanks

yg
 
Call them back, do not touch anything if you don't know what it is or does.

If it is a completely new system & pipework then they have piped it up incorrectly a new system should not have a non-return installed.

The worrying thing is if they can't install the heating system correctly has the un-vented (Megaflo) been installed correctly & signed off to Building Control ?

Give them one more go to put things right, otherwise you need to find someone else.
 
Agree with Chris could we see some pics of the install
 
As asked for Photos would be a great help, may be a good idea not to use anything until it has been checked and tested to make sure it is safe, you have a potential Bomb in your loft
 
Status
Not open for further replies.

Reply to Vaillant System Boiler- No Hot water but heating is working! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
294
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
148
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
207
P
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock