Search the forum,

Under Tap Chrome Washer

Post new thread

Discuss Under Tap Chrome Washer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

steadyon

Esteemed
Messages
1,026
I'd be grateful if anyone could let me know of a supplier for a chrome plated brass washer with an outside diameter of 80mm and a central hole of 48mm diameter, about 6mm thick.

I'm changing a bath tap for a customer. Old one was an Ideal Standard Domi, new one an Ideal Standard Ceraplan, and the fixing bolt holes for the old show to the side of the new, and need to be covered up.
 
Your dimensions sound quite specific
If Google isn't any help, make one (or get a machine shop to) and send it to get chromed
 
Status
Not open for further replies.

Reply to Under Tap Chrome Washer in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
240
DIwhYdidIstartThis
D
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
200
dreikher
dreikher
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
210
SimonG
SimonG
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
149
Stigster
Stigster
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
357
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers' Talk
Electricians Talk
Tilezine Tiling News Tile Association
Tiling Advice
Plumbing Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock