Turco Trojan 50/90 and 50/70

[apcdave]

Hi - don't see many of these around Antrim but tomorrow have 3 of three to service in Lurgan - all have Sterling Bentone ST40 burners - what nozzle would you recommend - can't find any info anywhere on 'em

many thanks chaps

dave

 

[lame plumber]

replace like for like is a good start

 

[Dotty]

Didn't know you were over in my neck of the woods Dave.

The M1 was shut at the Lurgan junction, Belfast bound, tonight. Dunno if that'll have a knock on tomorrow.

 

[Best]

On Kerosine a 50/70 is going to be maximum 0.6 nozzle
and a 70/90 maximum of 0.75 nozzle, if you don't know the MIs.
I would also personally go with 80 degree EH
Check oil pressure and perhaps 8 bar max.
Take plenty of Ceraboard with you for those boiler doors.

 

[apcdave]

thanks fellas - invaluable info as always cheers