Search the forum,

Discuss Turco Trojan 50/90 and 50/70 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
187
Hi - don't see many of these around Antrim but tomorrow have 3 of three to service in Lurgan - all have Sterling Bentone ST40 burners - what nozzle would you recommend - can't find any info anywhere on 'em

many thanks chaps

dave
 
Didn't know you were over in my neck of the woods Dave.

The M1 was shut at the Lurgan junction, Belfast bound, tonight. Dunno if that'll have a knock on tomorrow.
 
On Kerosine a 50/70 is going to be maximum 0.6 nozzle
and a 70/90 maximum of 0.75 nozzle, if you don't know the MIs.
I would also personally go with 80 degree EH
Check oil pressure and perhaps 8 bar max.
Take plenty of Ceraboard with you for those boiler doors.
 
Last edited:
Status
Not open for further replies.

Reply to Turco Trojan 50/90 and 50/70 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock