tools from yesteryear

[johnnyplumb]

found this in my garage the other day, i'll bet some people have never seen one of these.

 

[REDSAW]

got loads of them, sds drills arn't they?.

 

[johnnyplumb]

found this as well

 

[johnnyplumb]

got loads of them, sds drills arn't they?.

have an other guess

 

[johnnyplumb]

what about this

 

[tamz]

I'll no waste it for the young ones.

You will need to attend to the last one if you ever want to use it and get a decent result.

 

[Best]

Afraid I am just about old enough to know what they all are. Used them before a little. First one may stump a few, but I knew it straight away, as used one for hard jobs. Keep the kids guessing!

 

[ecowarm]

I must be old! 1; Life before battery drills 2; needs attention 3; I feel sorry for the moles

 

[kay-jay]

1) aint that one of them thingies that you banged into a wall then turned manually for putting in plugs?

2) looks like some kind of swaging tool???

3) tamz wallet! (bought in 1943 and stood the test of time as it seldom gets used cos like most scotsmen he's tighter than 2 coats of paint!)...............................................................or a moleskin for wiped joints on lead


how did i do?

 

[WHPES]

1, never used one myself but I have a few from my grandad. I ground them to a chisel and use them for raking out mortar. Must have been a hard job - guess thats why you see so many pipes bracketed to existing timber rather than walls where they can.

2, Is it some kind of tool for expanding the ends of pipes?

3, Moleskin (I have my grandads one here somewhere. Last used it when I was 13 and my grandad showed me!)

 

[johnnyplumb]

1) aint that one of them thingies that you banged into a wall then turned manually for putting in plugs?

2) looks like some kind of swaging tool???

3) tamz wallet! (bought in 1943 and stood the test of time as it seldom gets used cos like most scotsmen he's tighter than 2 coats of paint!)...............................................................or a moleskin for wiped joints on lead


how did i do?

2 out of 3 mate. i'll keep you guessing which one you got wrong. Theres a few on here that might think no3 a wallet but in current climate its definetly no a plumbers wallet, its far too thick for that.

 

[johnnyplumb]

I'll no waste it for the young ones.

You will need to attend to the last one if you ever want to use it and get a decent result.

I, its been a while since i wiped a joint, might have smoked a few though but thats another story.

 

[johnnyplumb]

1, never used one myself but I have a few from my grandad. I ground them to a chisel and use them for raking out mortar. Must have been a hard job - guess thats why you see so many pipes bracketed to existing timber rather than walls where they can.

2, Is it some kind of tool for expanding the ends of pipes?

3, Moleskin (I have my grandads one here somewhere. Last used it when I was 13 and my grandad showed me!)

why do I suddenly feel old at 48 when you start talking about your grandad. i'll post correct name for no2 later unless someone beats me to it.

 

[SimonJohns]

I know them as flaring tools for doing cup joints on lead. That's a mole skin. You'll also need a flux for that mole skin

 

[Best]

Wasn't it Tallow ( animal fat, for those that haven't heard of it )that you used for the moleskins for wiping lead joints? Think I have some in a tin - mice would eat it, if you leave it out.

 

[GQuigley67]

isnt number 1 one of those paddles for hitting the apprentice with ?

 

[kirkgas]

i know them all, might have the first 2 in the garage somewhere, used brown paper for the 3rd one

 

[diamondgas]

I remember that common ailment "hammer rash" ... often contracted whilst using No1

 

[Billy Bob Bob]

plug drift,flaring tool for lead,moleskin for lead wiping and yes its tallow for lead not flux

 

[woodsy]

1) rawldrill - left many a part bit in walls as an apprentice
2) looks like some sort of punch
3) moleskin / wiping cloth - still got mine and clamps- still gets you out of a hole sometimes.

 

[tamz]

The second one still gets used up to the line today.

 

[woodsy]

Go on Tamz, put me out of my misery, reveal what exactly no2 is ?

 

[tamz]

Here is another one. Different version.


Seen a few people nearly losing a finger with this type.

 

[woodsy]

I presume it is like my ( becareful how i spell this) tampin - small wooden coned shape tool for flaring old lead pipe

 

[Billy Bob Bob]

Here is another one. Different version.
View attachment 4249

Seen a few people nearly losing a finger with this type.

that would have been useful today,the apprentice has the squirts would have stopped him going to the bog every ten seconds

 

[Puddle]

Here is another one. Different version.
View attachment 4249

Seen a few people nearly losing a finger with this type.

sure thats not a but plug Tamz ?

 

[tamz]

For beginners :lol:

 

[tamz]

I presume it is like my ( becareful how i spell this) tampin - small wooden coned shape tool for flaring old lead pipe

Similar thing but for copper. We call them drifts up here. Used for manipulative type B compressions.

 

[ecowarm]

I presume it is like my ( becareful how i spell this) tampin - small wooden coned shape tool for flaring old lead pipe

Turnpin

 

[Billy Bob Bob]

Turnpin

he,s offline LOL

 

[Hybrid]

My swaging tool is actually an old artillery shell lol! Raised a few eye brows!

 

[REDSAW]

My swaging tool is actually an old artillery shell lol! Raised a few eye brows!

dont like it up em cpt mannering do they?.

 

[ecowarm]

dont like it up em cpt mannering do they?.

Fuzzy wuzzies

 

[Dannypipe]

You good old boys really knew how to do plumbing proper.

An inside out mole, and a lump of steel (that you clump with a hammer) was all you needed to create works of such quality, they've lasted decades.

Of course, I'm very handy with a pushfit coupling and a few flexi hoses.....but then I was born in the late 70's, not plumbing during them.

 

[mrlennie]

Of course, I'm very handy with a pushfit coupling and a few flexi hoses...

Why use pushfits at all when you can just link flexis!