Search the forum,

Discuss Timer wiring installation in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Matty Birch

Gas Engineer
Messages
99
Hi guys need help wiring up a programmer to glowworm betacom ... usually have an electrician that charges me £40 but has today let me down, have done basic wiring before before never installed stats. Will attach a few photos and beg for guidance (manufacturers either arent clear or i cant look past the end of my nose)

Thanks in advance.

20180529_112152.jpg


20180529_112311.jpg
 
Make sure it complies with boiler plus or you have something else that does. Link live and common in the timer back plate and connect the RT on the green boiler block to terminal 3 in the back plate ( if it is a wiresless programmable stat )?
 
Pal,
If you can't understand what is required off the wiring diagram, get a sparks in.
As far as I can see, there are a couple of options available, depending on the thermostat requirements and the boiler requirements.
 
Pal,
If you can't understand what is required off the wiring diagram, get a sparks in.
As far as I can see, there are a couple of options available, depending on the thermostat requirements and the boiler requirements.
That’s why I asked what stat/timer it is mate
 
Looks like a Drayton backplate

I'm guess migeni
 
Be careful what you link to or you could blow the board ! 230 or volt free connection
 
Cheers guy for response lads ... its a drayton mitime ... will have a nest in in next few weeks (due a full rewire) but my usually sparkys have a good bank hol i think and isnt answering phone, comments really helped got there in the end my idea was to take rt to common live (dont ask lol) any decent wiring courses out there tou could reccomend? North west based
 
baxi 3 day wiring course

did you remove the 24v link?
 
Cheers guy for response lads . its a drayton mitime . will have a nest in in next few weeks (due a full rewire) but my usually sparkys have a good bank hol i think and isnt answering phone, comments really helped got there in the end my idea was to take rt to common live (dont ask lol) any decent wiring courses out there tou could reccomend? North west based
Danfoss or Honeywell both run good courses and hands on.
 
Status
Not open for further replies.

Reply to Timer wiring installation in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
1
Views
29
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock