Search the forum,

Tiger loop connections

Post new thread

Discuss Tiger loop connections in the Oil and Solid Fuel Forum area at PlumbersForums.net

Bogart

Bogart

Messages
578
My ageing tiger loop could do with replacing. All I can find online have horizontal connections whereas mine has the connections vertically the pipes coming in from below. I was hoping I could get a straight swap unit. Will i need to alter my pipework as well then?
 
Externally fitted. Attached is a photo. Thanks
 

Attachments

  • TL.JPG
    TL.JPG
    342.2 KB · Views: 11

Reply to Tiger loop connections in the Oil and Solid Fuel Forum area at PlumbersForums.net

Similar plumbing topics

S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
64
Chuck
C
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
268
ShaunCorbs
ShaunCorbs
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
195
ShaunCorbs
ShaunCorbs
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
211
mutley racers
M
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum UK
Tilers Forum
Tiling Forum UK
Electrical Advice | Electricians Blog
UK Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock