Search the forum,

Tap identification please

Post new thread

Discuss Tap identification please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Eyespy999

Eyespy999

Plumbers Arms member
Plumber
Messages
148
I know its a long shot but been sent this photo from a customer of a tap that is leaking, no visible
identifaction so unsure if they are repairable. Any help appreciated!

IMG_4631.JPG


IMG_4632.JPG


IMG_4633.JPG
 
Exactly the same as my kitchen.
Chinese, I'm afraid only way is to remove the insert and measure all the dimensions.
 
nice easy change

honest opinion its the cost of the tap, labour will be the same either way

Bristan Monza EasyFit Mono Mixer Kitchen Tap Chrome
 
Depends to be honest on the quality of the metal work of the tap and overall condition.
That tap looks excellent condition, - so if the handles aren't made of some sort of rotting alloy and come off easily, then I would just replace the ceramic works that is faulty.
Carry a spare tap with you, plus a box of ceramic works and you might find you have works that match and only a 5 minute job.
I fix most mixers first visit.
 
Looks like a Blanco tap to me. They use a 28 spline ceramic gland not the usual 20. Look to pay between £40 & £80 for a pair of glands.
 
Status
Not open for further replies.

Reply to Tap identification please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Lou
Lou
B
Brass tap body is leaking.
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
297
Bp89
B
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
227
DIwhYdidIstartThis
D
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
49
Chuck
C
R
squeaky grohe bathroom tap 2 months old
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
1
Views
91
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock