Discuss SteveWannadogas in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 12,703
That's your own fault, you're never working where I am
- Messages
- 3,407
Make some out of all the fittings in the garage
R
Rickster123
So you can all winge at the solder runs in the pictures?! No chance!
- Messages
- 3,407
Not if you do a bit of decent soldering, not council bashing soldering :winkiss:
R
Rickster123
Could do something with hep and flexi's?...
- Messages
- 7,272
You have no idea
- Messages
- 34,366
- Solutions
- 2
- Status
Reply to SteveWannadogas in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Hello all,
I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...