Discuss splitting LPG gas line for new separate oven and hob in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

OneLooseCrank

Hi all,
Having started on the screwfix website and noted that many of the gas discussions were taking place in the plumbing forum, I thought I'd come back to the site that has helped me greatly so far.
We currently have a freestanding LPG gas cooker connected via a flexible hose. We are moving on to a separate gas oven and gas hob and I want to know how someone would go about attaching these. Should the flexible hose be taken back to the copper pipe, the pipe split to two lines and each separate unit piped-up? Can a plumber do this or do I need a heating engineer? The current LPG line is only 10mm in diameter.
Cheers
 
You will need a gas safe engineer who has lpg certificate the gas safe website will help you find a local engineer with the correct training and certification
 
Absolutely. Do not attempt this yourself.

Get a gsr with an LPG ticket to look at it. You may find it needs completely repiped.

I'm not telling you why.

Job 38.11.
 
Status
Not open for further replies.

Reply to splitting LPG gas line for new separate oven and hob in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
I have a new kitchen fit and the gas man just connected the hob and oven (both bayonet fittings low down). There is quite bit of the oven flexible...
Replies
6
Views
7K
Hi, sorry to bother you all with this but I am really struggling to find a suitable combi-boiler replacement and a knowledgeable heating engineer...
Replies
2
Views
1K
Hi Guys, I am not a gas engineer but would like advice on a job I have been quoted. There is a high level gas heater that has to be taken out of...
Replies
11
Views
7K
A number of issues have been raised from a boiler replacement. Boiler not operating and with no pressure. Tile damage Sprawling pipe layout in...
Replies
21
Views
5K
Z
  • Locked
Ridged pipe work always on hobs with an isolation right? Well is 10mm considered ridged even if it is easily bendable? also does anyone know if...
Replies
4
Views
132
kirkgas
K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock