Search the forum,

Discuss Smelly Miele prestige 6 washing machine in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Darleygirl

Hi everyone

my machine started smelling really bad and after a poke around I found that there was a load of foul smelling water hanging around in the drain outlet at the bottom left of the machine. I cleaned all this out, tipped the machine forward to clear it all, and thought I'd sorted it!

only a couple of washes later and the smell is back. Opened the outlet and again it's full of stale smelly water. Doesn't appear to be any blockages. Anyone have any ideas?

Thanks
 
It'll be a hairgrip, or button or one of those collar stiffeners somewhere in the drain hose. If you can't get to it by poking around with an opened-out wire coat hanger then best to call a professional in.

If you do poke around, make sure the machine is fully disconnected from the mains, not just switched off, and BE CAREFUL poking anything up the hoses - they are rubber and although pretty strong, they can be punctured..
 
Thanks for helping me out so quickly! I've checked the drain hose and nothing in there. Given it a good flush through with the hose pipe too and it's running freely.

ive noticed when I've drained all the smelly water out of the bottom, the Miele manual says to make sure the impeller is moving freely. When I turn this it doesn't spin right round as such but seems to have a point that 'catches' on each revolution if this makes sense? Should it do that or might that be the problem?

Thanks again, really appreciate your help :)
 
sounds like there is something stuck which is stopping the impeller spinning freely. time to get a WM engineer out I think
 
Understand there is a filter cap, remove that and look for anything around the impeller or in the bowl, worth cleaning the filter if you haven`t already.
 
Status
Not open for further replies.

Reply to Smelly Miele prestige 6 washing machine in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
296
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
417
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock