Discuss Sink tap removal - am I missing something obvious? in the USA area at PlumbersForums.net

Messages
2
Hi guys.

First time poster and by all admission an enthusiastic amateur...

I am trying to replace a washer in my bathroom sink tap. Having located the pipe isolation screw, I have managed to stop the dripping but for the life of me, having removed the tap cover, cannot work out how to remove the top of the tap! I was expecting a simple screw underneath but other than a tiny hole (which may or may not lead to a tiny screw), no obvious way to remove.

I’m sure it’s a pretty old setup that may require a plumber unscrewing various nuts underneath the sink but i’m hoping there is a slim chance I’m just missing something obvious? Seems like a lot of work to just replace a perished washer otherwise.

Pictures attached to help illustrate.

Thanks in advance.
 

Attachments

  • 6B0F538A-EE6E-4C27-AD4D-090A55A131C5.jpeg
    6B0F538A-EE6E-4C27-AD4D-090A55A131C5.jpeg
    56.2 KB · Views: 13
  • 7DE0AB7C-FE39-4553-BA77-9E00529FF09E.jpeg
    7DE0AB7C-FE39-4553-BA77-9E00529FF09E.jpeg
    63.4 KB · Views: 14
  • E58DDEBE-9705-4150-A5C9-7C17F32C557E.jpeg
    E58DDEBE-9705-4150-A5C9-7C17F32C557E.jpeg
    72.1 KB · Views: 19
Same as rpm and snowhead.

I know I’m not adding to the thread but I just want to know if snowhead has a spare of his nice blue spanner, I could do with one with such thin jaws.
 
Same as rpm and snowhead.

I know I’m not adding to the thread but I just want to know if snowhead has a spare of his nice blue spanner, I could do with one with such thin jaws.
Bacho do a nice thin jaw spanner.
or you could get the 8"
 

Reply to Sink tap removal - am I missing something obvious? in the USA area at PlumbersForums.net

Similar plumbing topics

I need to replace the washer of my kitchen mixer tap as it is leaking. I was able to remove the spout once by unscrewing the screw on the back of...
Replies
9
Views
474
I need to replace the double-check/non-return valve on the pipe that goes out to the back garden tap under the sink. I got the correct replacement...
Replies
3
Views
850
    • Winner
    • Like
Hi all, I joined today and am a newbie at plumbing DIY. Thought I'd share my experience replacing the stopcock under my sink. The old one looked...
Replies
1
Views
560
B
Need to remove the spout on a Franke Olympus tap. I have removed the hot/cold previously with an allen key and the spout kit has a 2.5mm allen key...
Replies
0
Views
729
Bob Hope
B
I'm probably missing something obvious, would welcome any suggestions on how I get access to the washers. We have a matching bathroom suite and...
Replies
1
Views
946
Deleted member 120897
D
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock