Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Simon g 10k

Post new thread

Discuss Simon g 10k in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Weve already had one of these :) but Croppie was a bit premature :) :)
 
Well done Simon top drawer input keep up the good work....regards Turnpin:smilewinkgrin:
 
Status
Not open for further replies.

Reply to Simon g 10k in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
What's happening to this radiator, paint flaking off?
Rad is only a few years old. Paint is flaking away at the top curved section and it looks like faint spots of rust where the rad is now bare.
Replies
3
Views
256
Lou
Lou
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Replies
11
Views
345
Matt0029
M
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
301
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
280
PSxxxxxx
P

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock