Search the forum,

Discuss Simon g 10k in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Barry98

Top posting Simon well done pal
 
Weve already had one of these :) but Croppie was a bit premature :) :)
 
Well done Simon top drawer input keep up the good work....regards Turnpin:smilewinkgrin:
 
Status
Not open for further replies.

Reply to Simon g 10k in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I removed the tile floor in my bathroom to fit vinyl and I noticed that the loo now leaks slightly when I flush it. I haven’t put the vinyl down yet, so I can build up the floor under the loo if needed to put it back to the level it was, but maybe I can re-seat the big plastic flange slightly or...
Replies
3
Views
298
Here to get plumbing help
Replies
2
Views
148
Evening all. I have an open vented C/H system with a heat only boiler and 10 rads over 3 floors. I checked the system mid summer and all was ok. Now one radiator won’t get hot. ALL rads contain water, I have bled all rads. No hot water getting to flow pipe of cold rad. All other rads are...
Replies
3
Views
542
Hi all, My partner and I recently bought a house and have been attempting to make the bathroom less fugly. I was removing the bath and shower taps to replace, but while removing the bath spout (which had no nut to undo), the threaded section of the pipe broke. I thought the bit that broke must...
Replies
6
Views
658
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock