Search the forum,

Discuss Seeking advice on my expansion vessel in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

Nicks

I have a Vitodens 100-W WB1B 26 kw system boiler. Which I believe needs a new expansion vessel, due to when I tried checking the pressure in this vessel, I had water spray out from the valve ..... Am I right that a split may have occurred ?
If so, is it a simple job to exchange new for old vessels over ???
As my friendly plumber at present is on his holiday :sunny:
 
sorry to say if the expansion vessel is located in the boiler you need to be gas safe to change/ take the case off the boiler so no
 
Thanks Shauncorbs.

I just believed it may have been a simple job, alls still working ..... but I wanted to understand if there may be damage being caused at present ........ not realising I would be tampering with the gas.

I will shall await my friends return in three weeks time then :-(

Thanks again
 
Nick , it could be a quick job but , even if you dont touch the gas it is illegal to take the case off .
 
Nick, to clarify, as my esteemed colleague's have mentioned removal of the case may well form an integral seal on the boiler which is obviously there for your safety. If you take it apart you won't have the tools or the know-how to test this has been put back properly
 
Last edited:
Up to my plumbers tan recovery, in three weeks time I guess then .... Riley
 
As a temporary fix isolate and drain out a rad then open the valves again as this will act as an expansion vessel for a few weeks.
 
Thanks Duncan but I've ordered the replacement expansion vessel, as written in the Vitodens parts list manual (014).

Just have to wait for Suntan man :) to return in 20 days. With a radiator now acting as the expansion vessel for the time being.
 
Status
Not open for further replies.

Reply to Seeking advice on my expansion vessel in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
184
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
102
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
277
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
264
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
239
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock