Search the forum,

Discuss Saunier duval smart thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Booth01

Hi I am looking for a smart thermostat but don't know which will fit
I went on nest web site and said check wires for codes but won't fit
as seem to only have 1234 in circuit board just seeing if any one has fitting one
to these boilers
thanks
 
Hi I am looking for a smart thermostat but don't know which will fit
I went on nest web site and said check wires for codes but won't fit
as seem to only have 1234 in circuit board just seeing if any one has fitting one
to these boilers
thanks

what model saunier duval?
 
Semia condens F24
you should have a white external controls lead to connect external controls to. This connection is a volt free/ potential free contact that acts as a switch you must not apply any voltage to this connection.

Edit: The nest heat link relay is compatible with this method. In their manual they refer to it as a "dry contact".
 
Last edited:
you should have a white external controls lead to connect external controls to. This connection is a volt free/ potential free contact that acts as a switch you must not apply any voltage to this connection.

Edit: The nest heat link relay is compatible with this method. In their manual they refer to it as a "dry contact".
Thanks yes got a white lead hanging down I will look for a nest one
 
Thanks yes got a white lead hanging down I will look for a nest one
most thermostats will be compatible you just have to make sure you install it correctly as not to apply voltage to the external controls connection within boiler.

A few other options would be netatmo, owl, salus it500, hive, heatmiser neo, tado, etc
 
Last edited:
most thermostats will be compatible you just have to make sure you install it correctly as not to apply voltage to the external controls connection within boiler.

A few other options would be netatmo, owl, salus it500, hive, heatmiser neo, tado, etc
Ok thanks looking at a Honeywell
 
Status
Not open for further replies.

Reply to Saunier duval smart thermostat in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
238
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
291
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
291
Hi. I need a new toilet supply line but donā€™t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
209
I have an ideal vogue max S18 boiler and Iā€™m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
170
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock