Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Regin 45 U-gauge repairs? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
S

Sam Patching

Hi, Have just noticed my trusty Regin Premier 45 U-gauge is leaking but I can for the life of me find anywhere online that sells spare bits. Does anyone know of an online stockist for spare o-rings or rebuild kits as I dont think this warrents replacement yet.

U35.preview.jpg

Cheers :stooge_curly:
 
Last edited by a moderator:
take it you have tried regin?what about a universal o ring kit?
 
Just buy a new one. I must be on my 100th by now (they used to have glass tubes)
 
Are these ones any good? I have an anton digital one at the moment and its due for calibration but I cant get it calibrated so I am currentley looking at new ones but still leaning towards a digital one
 
Search Google for REGU38. That's the stopper and screw. Keep the Heat On has them.
 
Are these ones any good? I have an anton digital one at the moment and its due for calibration but I cant get it calibrated so I am currentley looking at new ones but still leaning towards a digital one

I quite like mine. Clear, easy to read.
 
Are these ones any good? I have an anton digital one at the moment and its due for calibration but I cant get it calibrated so I am currentley looking at new ones but still leaning towards a digital one

It's a good piece of kit. No calibration required,no batteries to change.I've had mine for 10 years now.Very pleased with it.
 
Thanks CMairiD :) And Villa Tom, I would not use anything else these days, they are easy to read, rarely lose their fluid because of inbuilt traps and are easily adjusted using a screw at the bottom. Only downside I can see is that the fluid is expensive for what it is & cant be filled wit anything else.
 
Just looked online and these are only fifty quid. I think I may have to but one as my next one as I have been looking at buying another anton and they are far more expensive
 
Status
Not open for further replies.

Reply to Regin 45 U-gauge repairs? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
232
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
241
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
319
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
172
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock