B
Bumps
I wish to change all my radiator valves I have 1/2 inch imperial copper pipe can I replace with metric TVRS
Discuss Radiator valves fitting metric to imperial piping in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Radiator valves fitting metric to imperial piping in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi all I'm hoping someone can shine a light on this for me
Since our stop tap on the pavement has now been filled with sand for whatever reason...
Hi, basic question, any insight much appreciated.
Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
Newest Plumbing Threads
-
Y Plan central heating gets hot on hot water demand
- Started by MPGASANDPLUMBING
- Replies: 0
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 6
-
Instructions say to apply glass cement to rubber washer. Can I use silicone?
- Started by JM Tiling
- Replies: 2
-
How do I remove the copper pipe from the plastic connector?
- Started by JM Tiling
- Replies: 2
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 1
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 2
-
