- Messages
- 11
Hi, ive bought a flat panel aluminium rad off ebay and one of the 4 outlets is slightly larger than the other 3 by about 1 mm. Has anyone come accross this before and so what is the solution.
Cheers
Cheers
Discuss Radiator blanking plug size in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Has anyone come accross this before and so what is the solution.
No mate theres prob a 1mm gap all round.Does it actually screw in? If it does I’d wrap some ptfe on the thread. If it doesn’t fit I’d be looking at contacting the seller. Whats the diameter of the thread out of curiosity?
That’s why I asked what diameter the thread was in case it was some Chinese knockoff with an unusual thread size. Jason, Ask for an exchange, if that’s the same get a refund.Rake of ptfe and paste.
Or get shot.
Maybe why it was on flea bay in the first place.
Ours are either 1/2” or 3/4”. Have you tried a 3/4 to 1/2” bush. Long shot but worth a try.That’s why I asked what diameter the thread was in case it was some Chinese knockoff with an unusual thread size.
No mate.Does it actually screw in? If it does I’d wrap some ptfe on the thread. If it doesn’t fit I’d be looking at contacting the seller. Whats the diameter of the thread out of curiosity?
Have tried pal,3/4 is to big 1/2 to small, maybe find a bolt of some description and ptfe it to death.Ours are either 1/2” or 3/4”. Have you tried a 3/4 to 1/2” bush. Long shot but worth a try.
Its mine mate,its a buy to let property.Is it your property or a customEr
Reply to Radiator blanking plug size in the Plumbing Jobs | The Job-board area at PlumbersForums.net