Search the forum,

Discuss Rachet Spanners in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

djob

Does anyone ever find the need or a job that you'd need a ratcheting spanner for, I like the look of the wera joker 4 piece set..
 
I have a pair of ofsett ratchet spanner's.
19 mm for wall hung toilet bolts.
17 mm for fisher fixing bolts
Toolstation > Automotive > Ratchet Spanners > Offset Ratchet Spanner Set
image.jpg
 
ive got a 10mm one, good for cistern bolts nuts and many other nuts.
 
Halfords advance professional for ratchet spanners and socket sets. Great quality and lifetime warranty
 
Half price on the flexible Ratchet 9-piece set isn't it? I'd rather not have the flexible ones..
 
I used one 10mm one to remove van vault tube carrier , after second nut went and found deep sockets
 
Half price on the flexible Ratchet 9-piece set isn't it? I'd rather not have the flexible ones..

Ratchet flexibles are very useful but you want the combination ones, ie open wrench one end. Halfords Advanced have a lifetime guarantee.
 
Status
Not open for further replies.

Reply to Rachet Spanners in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
203
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
198
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
195
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
122
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
280
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock