Discuss Pump over run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
52
Ive been to a customers who's looking to replace a 30year old potterton flamingo 50s, keeping same type of system, all the wiring is in the airing cupboard at the other end of the house, so ideally I need a boiler that doesn't need the pump over run as customer doesn't want his house taking apart, does anybody know of any other boilers other than baxi solo that doesn't need a pump over run. Or does anybody know any clever ways round it.

thanks everyone
 
Ive been to a customers who's looking to replace a 30year old potterton flamingo 50s, keeping same type of system, all the wiring is in the airing cupboard at the other end of the house, so ideally I need a boiler that doesn't need the pump over run as customer doesn't want his house taking apart, does anybody know of any other boilers other than baxi solo that doesn't need a pump over run. Or does anybody know any clever ways round it.

thanks everyone

Hi get a Viessmann in there pump overrun not required,due to heat exchanger,great bit of kit can't go wrong,just make sure you get the air out heatexchanger which has a vent job done!
 
Hi get a Viessmann in there pump overrun not required,due to heat exchanger,great bit of kit can't go wrong,just make sure you get the air out heatexchanger which has a vent job done!

Which model would you recommend, never fitted a weissman. I assume it's just a straight swap wiring wise then.
 
Which model would you recommend, never fitted a weissman. I assume it's just a straight swap wiring wise then.

Hi it's a Viessmann compact heat only,all you need is earth live neutral and switch live simple,just get air out of main heat exchanger on fire up.nice and compact size can't go wrong
 
HI doesn't it have a Ali heat exchanger ?also 2 year warranty not good and mixed reaction on service from heateam?!
I know nothing about them TBO,someone on here gave me this link yesterday.Your pretty limited to what you can put in without a pump & permanent live.The last one i fitted was the old ideal classic. Sorry can"t help anymore.
 
I seem to remember ermintrude saying that the logic plus heat only doesnt require pump overrun.
I may be mistaken but a quick pm to ermi or a browse of ideals tech literature online should yield you the required information.
 
No logic heat does but just pressurise and use logic system! Boosh no extra wires

Well u need to run 3 cores between boiler and ac
 
No logic heat does but just pressurise and use logic system! Boosh no extra wires

Well u need to run 3 cores between boiler and ac
Don't now why more installers don't push customers in the direction of a system boiler. No more tank to worry about in the loft.
 
Status
Not open for further replies.

Reply to Pump over run in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
335
Hi, i've got a job with a Vaillant Ecotec 630 system boiler, and i don't know the full history but the house has definitely been extended...
Replies
2
Views
596
  • Question
Central Heating Pump - G Pump Force HE-RS25/6PWM-130 Hi, I would be grateful if someone could explain whether our CH system can cope with the...
Replies
7
Views
613
have moved a pump by new boiler so could wire for pump overrun as no live in airing cupboard, but now I am worried about air ingress into the...
Replies
3
Views
755
Hello, Newly moved into a house with a mains fed cylinder system. I've never had one before and struggling to get it working. When I turn either...
Replies
11
Views
818
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock