Search the forum,

Discuss plumbers mate required with central heating experience in basildon area. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

fiander1

i am looking for a plumbers mate to work with me and carry out installations of new central heating in dwellings in basildon. please message me if interested.
 
Hello fiander1, if you work weekends I am available from next Saturday if that is any use? I can email you my cv if you are interested. I am inexperienced but I am more than capable to come along and be a dogs body in return for the learning experience.

Thanks
 
Hi Fiander 1,

This would be an ideal position for me. Been in the trade just over two years. Had a year on commercials now on my own. Have some all round experience plus a fair bit of bathroom and tiling install work. Have my own van and good range of tools and very easy to get on with. Paul
 
hi paul, thanks for your interest. do you have much experience in fitting heating systems? are you gas safe registered?
 
A gas registered plumbers mate who can do 1 day installs? You are not asking for much. He can work on your ticket as he is a trainee.
 
I have some experience but sounds like you need more than a mate?
 
Really your looking for a plumber who is skint so you can pay him crap money Think this should be your post
 
I may well be an old git and a late starter in this trade but I love my work and give 100% to every client and produce good work. I just wish people would be honest about what they want and expect.
I cover parts of essex and kent so if anyone does have the odd day here and there for a very reliable plumber please let me know. Paul
 
well if someone wants 12 weeks work who is out of work at the moment and has fitted central heating then give me a ring on 07929343596
 
What rates are you paying?

See my previous post, would consider working for 3 weeks over the festive season if the money was right.
 
hi im 19 from dartford. done my level 2 city and guilds 6129 but couldnt complete my nvq becuase the company i was working for went bust. im hard working and worked on site ofr 8 months and have also worked along side another plumber doing domestic plumbing including many central heating systems. i have got most tools except power tools as i cant afford them yet. i can drive so travelling isnt a problem for me
 
Did try in boxing you i have finished my level 3 now would welcome the work and dont mind travelling to basildon as long as the wage is right
 
Status
Not open for further replies.

Reply to plumbers mate required with central heating experience in basildon area. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
115
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
445
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock