Search the forum,
  • Thread starter Tiddler
  • Start date
  • Replies 3
  • Views 756

Discuss Pipe/conduit carrier in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Tiddler

Hi I'm after a large aluminium tube and i was wondering whether anyone knows of any wide ones available. The biggest I have found on the internet is the van vault 165 which is 180x150mm and 3.1 meters long. But a have seen some on passing vans that look quite a bit bigger. Length needs to be a minimum of 2.4 meters. If anyone knows of any wider ones please reply. Thanks.
 
Status
Not open for further replies.

Reply to Pipe/conduit carrier in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
185
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
273
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
416
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
307
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
224
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock