Search the forum,

Discuss organising vans in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

cdodds2004

Plumbers Arms member
Plumber
Gas Engineer
Messages
819
got my vivaro racked down one side and some little trays on the other, what else do you guys use for say keeping screws organised etc in your van? mine just ends up a mess, and it really frustrates me
 
Stanley organisers for fittings.
Screwfix tin for screws.
Plastic containers for plastic pipe, wire, wc parts, stop taps, outside taps, etc.
Not a brilliant system as frequently I grab a cardboard box from the merchant and never "file" my goodies so end up search through 2-3 cardboard boxes and a bucket or two as well.
 
you sound exaclty like me mate!! lol im hoping some one has a really anal method i can copy :D
 
Everyone! We will praise the neat/organised and have a laugh at the messy ones ( yours )
 
Presumably office rules apply:

An untidy desk indicates a hard working and busy person. (Tidy desk means you've too much time on your hands.)
 
had a customer tell me she trusted me because all my tools looked used and dirty/rusty lol love working with water
 
Right hand side of my Vivaro is racked all the way along 15/22 fittings in the first half and waste fittings on the other half. Left hand side with door is 15/22 plastic fittings, clips and odds and sods with steps hanging from the roof inside and roof rack with tube holder for copper and soil for lenghts of waste
 
how have u supported your ladders inside i really want to do this as mine get in the way and allways topple over when i take stuff out which bugs me sooooooooo bad!
 
i have done that in my transit i will randomly take a picture when i am next out at it , Best way i did was ratchet straps tried lots of ways this is the only way that works for me
[h=3][/h]
 
I have a piece of batten between the racking near the front and a bungee cord at the back in the holes and the panels keeps em nice and out the way
 
my little berlingo is wayyy toooo small for a plumbers van, even tho i have a rack one side full of divided bits for fittings, and the other side a rack for the little boxes of bits.... yet i still manage to have a shi.....shocking load of toold and bits on the middle. i have unfortunatly, in the last 3 weeks, turned into my old 'trainner' by using the Travis Perkins bags to put fittings and random bits in. i HATE it as i used to cuss him (under my breath) at his shocking organisational skills!!!

a good idea tho, is to put ur small ladder under the roof, using a couple battons either side of the van so u can side it in and out. if u have space, build a suspended floor for the odd pipe, etc......

or, just get a bigger van!
 
also... if u have a panel between the coach and the back, i have drilled a hole on the left so i can get long lengths of pipe along the van... only problem is that some one has to cock their leg over all the pipe when they r a passanger, but no one has complained so far! who doesnt like to cock their leg?!!
 
My old boss was like that stuff everywere in the van (old escort) id sort it out one day go and work with a different bloke for 2 days come back and it looked like a bomb had gone of
 
my vans shocking. i was supposed to sort it out over xmas but somehow its nearly May and i've still not done it

if only it was because i was so busy...........
 
You've still got 8 months till Xmas so should be no worries ...
 
I have a vauxhall vivaro and i still find it too small. At the moment I have no where to store my coils of get out of a dilemma plastic pipe, or, my short lengths of copper 26042012(001).jpg26042012.jpg
 
any ideas on how to stall the above mentioned would be welcomed. I like the idea of a false floor, but then it would be difficult to get fittings out from the bottom shelf
 
I have racked mine out, assorted racks on one side that are for fittings all set out 1 for 15mm sockets though to comp ones, next lot for 22mm, waste pipe fittings in another and so on, a couple of shelve on the other side for short bits of tube, benders and other bits and pieces!! all very good then I get a call out and throw everything back in the van and go, don't stop running round for a week and it rumaging round in bags for fittings.

I try and keep it sorted but a mess faster than I can tidy!!!
 
reading this thread reminds me i really should tidy my van up:shades_smile:
 
What are you lot on about??
As already stated if you got time to organise your van then cant be busy enough !!!
I cant even get in my van somedays its like pts on wheels
 
Wish I had taken pictures of my old van before it went back to my old employer. It was pretty awesome in the racking dept. Mind you it was massive VW crafter hi top, bit like a green grocers vans in the back! (2 for a pound) all made from aluminium angle. Hoping to do similar in my new van if I ever find one
 
What are you lot on about??
As already stated if you got time to organise your van then cant be busy enough !!!
I cant even get in my van somedays its like pts on wheels

More haste less speed. Keeping your van (and workspace) tidy and organised means that you can achieve more in the same time.
 
i like the idea of a a suspended floor, could fit loads of stuff under it. or even just a partial one, i have to pices of waste pipe screwed to my racking for keeping off cuts of pipe in and spirit level benders etc, works pritty well. going to look into getting ladders under the roof tomorow i think!
 
would like to see how you guys wack the ladder to the under size of the roof. Is no one into these telescopic ladders then?
 
this is my vavrio , done a while back
 

Attachments

  • IMG_0519.jpg
    IMG_0519.jpg
    87.9 KB · Views: 386
  • IMG_0520.jpg
    IMG_0520.jpg
    90.4 KB · Views: 364
  • IMG_0521.jpg
    IMG_0521.jpg
    82.7 KB · Views: 347
  • IMG_0518.jpg
    IMG_0518.jpg
    88.3 KB · Views: 351
Looks good Bod!

As the car's in the garage the misses has been forced to drive my van to work, she gets back and says: "what's in the back thats rolling around and making a noise?"

That'll be the wet vac, assorted tools, fittings etc where I've not tidied it up for a while then!
 
No matter how often I seem to tidy my van it gets into a mess so quickly I really do need to be more organised when I put stuff away, the temptation is just so high when running late to just chuck stuff on the back and dash off.
 
nice bod. I like the little work surface you have in the back. Has anyone seen these vices you can attach to the van? I have looked every where but can,t seem to find them
 
very nice bod only problem ive had when ever i make a rack to fit items the said item then gives up the ghost and its replacement doesnt fit the hole for it, like the big bucket for shorts of tubeamazing how much stuff we all have in common
 
New posts
Status
Not open for further replies.

Reply to organising vans in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
133
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
185
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
181
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
240
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock