Search the forum,

Discuss oil boiler install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

chelsea

I'm a Gas safe engineer and have been asked to install an oil boiler,i have not seen the job yet.


Can i install the boiler and ask(pay) building control to sign it off

Obviously i would have to follow the MI's to the letter
 
I'm sure one of oilies Will correct me but I believe in you used to be able to do what you are proposing but fairly recently it has fallen in line with Gas Safe in that the install has to be done by a qualified engineer
 
Just get one if your oilly mates to come and commission it
 
Once upon a time it was the commissioning as the notification. It has now changed. It is now the installation side.

Note to op. If you install it. How you going to start it up?

Better finding somebody who does oil to do it with you. Then you know whats what and everything is above board. You might even get to like the smell of kerosene for breakfast :)
 
You might even get to like the smell of kerosene for breakfast :)

I hated it when I first started oil but now I hardly notice it. My van stinks of oil all the time from used pumps, hoses etc in the back.
 
Status
Not open for further replies.

Reply to oil boiler install in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
264
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
472
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
204
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
251
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
242
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock