Search the forum,

Discuss north devon plumbing work wanted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Tom Boothby

Hi my names tom and am currently 25. I have just finished my level 2 plumbing course 6035 (none nvq) at college. Have had work experience with a local plumber for 6 months but his work slowed down a few months ago and was unable to keep me on. need to set up a portfolio so i can do my nvq.

Looking for somebody that has the work available to take me on. I have my own van and basic tools. have a full clean driving license and very reliable. Willing to work for free to get trained. Willing to travel so looking around devon, somerset, cornwall.

Have currently started to send out cv's and covering letters to all local gas safe firms and am starting to extend this area. have emailed and visited local plumbing merchants and have left details there for them to pass on if they here anything.

Does anybody have anything available? or any ideas what else i can do to help find something?
all help would be appreciated.

tom
07429101698
 
Status
Not open for further replies.

Reply to north devon plumbing work wanted in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
B
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
0
Views
38
B
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
199
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
451
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock