Discuss Noisy Pegler bathroom mixer tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
F

fraz101

I have a Pegler mixer tap in the bathroom that is extremely stiff and noisy,i have tried lubricating the cartidge on various occasions which helps for a day or two.

I contacted pegler who gave me the part number but its blooming expensive for a cartridge £50!!!!!

Any one suggest an alternative?

Also under the tap are 2 flexi pipes one for hot one for cold,but only the cold has an isolation screw,how would i go about turning the hot off so i can remove the cartridge without a flood?
 
to isolate it it would depend on your plumbing system, what do you have, if you dont know tell me what's in your airing cupboard and/or loft

Sometimes the cartridges do need replacing and I agree that £50 is a lot but regretfully there wont be another one that fits
 
Status
Not open for further replies.

Reply to Noisy Pegler bathroom mixer tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
233
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for...
Replies
1
Views
315
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes...
Replies
7
Views
535
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
288
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock