Search the forum,

Discuss No hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

angel

Hi,
Can any one help with a problem.I have a multi fuel Rayburn. I have never had any problems with the hot water until last Friday when I had an upstairs leaky radiator replaced. Since then I have had no hot water. Help, this Angel needs a bath.
 
Was it drained down to replace the radiator. Probably air in the coil or pipework.
 
Hi Angel, youd best to get the guy who done the job as sounds like he hasnt fully vented the system or its just really bad timing for one of your motorised vales to pack in and believe me it happens , theres nothing worse when we visit a house to do some work then 2 days after finishing the boiler breaks down , looks bad on us but sometimes its simply bad timing lol,
 
by multi fuel, I presume you mean solid fuel burner ie wood/coal. Best stoke it up and get it roaring for 1/2 an hour or so, may well solve the problem for you, it will thump a bit in the process.
 
Multi fuel ignore my motorised valve comment ooops sorry
 
get in the queue, my advice probably helped and I've got her towel :)
 
Status
Not open for further replies.

Reply to No hot water in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
311
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
361
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
279
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
218
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
244
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock