Nice little bonus in a delivery today

[SimonG]

I only ask because I have had just as good results by adding a cleaner for 7 to 10 days, flushing it out, fitting a centramag and getting a couple of bottles of inhibitor in. Compared to using a power flusher.

Looks like I just might have to invest.

 

[IDCHAPPY]

I need my next crate, ideal system boiler order coming up

 

[Simon F]

this is interesting.
so whats the deal with it working on its own,
do you just pipe into the return before boiler and have it working like a super effective magnetic cleaner??
get things warmed up with a chemical in the system and bang all the radiators??
working one on at a time like with a power flush,
then after a couple of hours drain down and swap it for regular magnetic filter??

 

[kay-jay]

this is interesting.
so whats the deal with it working on its own,
do you just pipe into the return before boiler and have it working like a super effective magnetic cleaner??
get things warmed up with a chemical in the system and bang all the radiators??
working one on at a time like with a power flush,
then after a couple of hours drain down and swap it for regular magnetic filter??

Basically yes.
If you use the mc filter you install that, close the isolations remove the plasticbody and the magnacleanse is designed to go on the same unions.

 

[Ermintrude]

You don't bleed rads so less water in system as all the sludge is at bottom. Buy some John guest 22mm push fit 3/4 iron adaptors then u can fit onto new pro. 2 and old ones also u can fit into old system by removing 3 port and some fittings

 

[Simon F]

this has been a useful thread for me,
I just thought these were to add to the power flusher to give more cleaning potential.
the instructions are all there pictures and full instructions as to how to use it on the Adey web page.

ADEY - MagnaCleanse

 

[Chalked]

You don't bleed rads so less water in system as all the sludge is at bottom. Buy some John guest 22mm push fit 3/4 iron adaptors then u can fit onto new pro. 2 and old ones also u can fit into old system by removing 3 port and some fittings

The kit comes with the speed fit adaptors.

 

[Ermintrude]

Ah it didn't back in the day!

 

[Ray Stafford]

The kit comes with the speed fit adaptors.

Ah it didn't back in the day!

It does when you buy the Mack01 pack which Chalked bought. However, you can by the bare machine, without the adaptors or the rad hammer thingy. Its a bit cheaper, but they sting you like hell for the extra bits.

 

[Ermintrude]

Ah ours were upgrades from mrk 1 to mark II so didn't need all the bits. Got hoses and a few new hammers but that was it.