Need help bleeding system

[Rick]

Anybody ????

I just don’t wanna mess it up
[automerge]1567577461[/automerge]

Blue headed valves are your purge point so hose pipe onto that outside

Close the red lever valves after them

Turn power off to the system etc

Manually open the zone valves (note if you didn’t turn the power off the pump would run)

Open the blue head valve you should start to hear water flowing also you should hear the auto fill start to open eg letting water in etc

Give it a good 10 mins or until clean then turn the blue headed valve off

If you have gycol in the system best option would be to get a plumber to flush the system and re dose with fresh stuff

Watch the vid I posted will give you an idea what to do

Can you please help me

 

[ShaunCorbs]

Anybody ????

I just don’t wanna mess it up
[automerge]1567577461[/automerge]

Can you please help me

Sorry no best get a pro out

 

[Rick]

I thought this forum is to help DIY People learn and ask advice cause I am a antique car restorer on many forums and lots of us share knowledge and experiences but I am not sure if I even have he correct forum