Discuss multi fuel stove in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

peter puddles


I would appreciate any help / guidance.

We are looking to get a wood burning stove installed to a newly built house this would involve an internal chimney and all that goes with it in terms of the regs, that I find straight forward. What I don’t seem to be able to get is information / schematic diagrams of how to link a Boiler Stove in to what is an existing installation.

Our current set up is :

Natural Gas boiler one controls , 200 sq / metres of under floor heating (Ground Floor area )

Natural Gas boiler two controls , first floor radiators and unvented 300L cylinder

I would like to with the use of a nuetraliser ( dunsley heat ) somehow connect in to boiler two so as that my stove is the primary source of heat ,
When the stove is not lit or summer time I would want boiler to do the work.

Any help or guidance would be appreciated.

Many Thanks
 
Welcome to Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK!

Welcome to UKPlumbersForums.co.uk peter puddles. Thanks for introducing yourself.
 

I would appreciate any help / guidance.

We are looking to get a wood burning stove installed to a newly built house this would involve an internal chimney and all that goes with it in terms of the regs, that I find straight forward. What I don’t seem to be able to get is information / schematic diagrams of how to link a Boiler Stove in to what is an existing installation.

Our current set up is :

Natural Gas boiler one controls , 200 sq / metres of under floor heating (Ground Floor area )

Natural Gas boiler two controls , first floor radiators and unvented 300L cylinder

I would like to with the use of a nuetraliser ( dunsley heat ) somehow connect in to boiler two so as that my stove is the primary source of heat ,
When the stove is not lit or summer time I would want boiler to do the work.

Any help or guidance would be appreciated.

Many Thanks


Hi Peter

I have been installing one of these [DLMURL="http://www.newarkcoppercylinder.co.uk/cylinders/solar_thermal_store/"]Solar Thermal Store | Newark Copper Cylinders[/DLMURL] this week to link in solid fuel boiler an oil boiler and it has a solar coil at the bottom which will be installed in the next few weeks.

Eco
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to multi fuel stove in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
367
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
301
PSxxxxxx
P
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
564
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
233
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
410
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock