Hi,
Have lived in our house for around 10 years and always had bad pressure if more than one tap is running, toilet is flushed etc(hot and cold). We have (what I believe to be) a mains pressure system with a non vented Megaflow cylinder.
We are about to install a new thermostatic shower and mentioned this to the plumber. He had a good look for us and concluded that the Megaflow pressure reducing valve has been placed in the wrong position. Its currently right after our stopcock as the water enters the house. He has quoted us to move this to the correct position to where the cold supply enters our Megaflow in our airing cupboard. Does this sound likely? and the right thing to do?
Have lived in our house for around 10 years and always had bad pressure if more than one tap is running, toilet is flushed etc(hot and cold). We have (what I believe to be) a mains pressure system with a non vented Megaflow cylinder.
We are about to install a new thermostatic shower and mentioned this to the plumber. He had a good look for us and concluded that the Megaflow pressure reducing valve has been placed in the wrong position. Its currently right after our stopcock as the water enters the house. He has quoted us to move this to the correct position to where the cold supply enters our Megaflow in our airing cupboard. Does this sound likely? and the right thing to do?