Search the forum,

reducing

A reducing agent (also called a reductant, reducer, or electron donor) is an element or compound that loses or "donates" an electron to an electron recipient (called the oxidizing agent, oxidant, or oxidizer) in a redox chemical reaction. The oxidation state, which describes the degree of loss of electrons, of the reducer increases while that of the oxidizer decreases; this is expressed by saying that reducers "undergo oxidation" and "are oxidized" while oxidizers "undergo reduction" and "are reduced". Thus, reducing agents "reduce" oxidizers by reducing (decreasing) their oxidation state while oxidizing agents "oxidize" reducers by increasing their oxidation state.
To clarify, in a redox reaction, the agent whose oxidation state increases, that "loses/donates electrons", that "is oxidized", and that "reduces" is called the reducer or reducing agent, while the agent whose oxidation state decreases, that "gains/receives electrons", that "is reduced", and that "oxidizes" is called the oxidizer or oxidizing agent.
A reducing agent is thus oxidized by an oxidizer when it loses electrons that are gained by this oxidizing agent, which itself is simultaneously reduced by the reducer.
In their pre-reaction states, reducers have extra electrons (that is, they are by themselves reduced) and oxidizers lack electrons (that is, they are by themselves oxidized). A reducing agent typically is in one of its lower possible oxidation states and is known as the electron donor. Examples of reducing agents include the earth metals, formic acid, oxalic acid, and sulfite compounds.
For example, consider the overall reaction for aerobic cellular respiration:

C6H12O6(s) + 6O2(g) → 6CO2(g) + 6H2O(l)The oxygen (O2) is being reduced, so it is the oxidizing agent. The glucose (C6H12O6) is being oxidized, so it is the reducing agent.
In organic chemistry, reduction usually refers to the addition of hydrogen to a molecule, though the aforementioned definition still applies. For example, the oxidizing agent benzene is reduced to cyclohexane in the presence of a platinum catalyst:

C6H6 + 3 H2 → C6H12Historically, reduction referred to the removal of oxygen from a compound, hence the name 'reduction'. An important example of this phenomenon occurred during the Great Oxidation Event, in which biologically−produced molecular oxygen (dioxygen (O2), an oxidizer and electron recipient) was added to the early Earth's atmosphere, which was originally a weakly reducing atmosphere containing reducing gases like methane (CH4) and carbon monoxide (CO) (along with other electron donors) and practically no oxygen because any that was produced would react with these or other reducers (particularly with iron dissolved in sea water), resulting in their removal.
By using water as a reducing agent, aquatic photosynthesizing cyanobacteria produced this molecular oxygen as a waste product.
This O2 initially oxidized the ocean's dissolved ferrous iron (Fe(II) − meaning iron in its +2 oxidation state) to form insoluble ferric iron oxides such as Iron(III) oxide − (Fe(II) lost an electron to the oxidizer and became Fe(III), meaning iron in its +3 oxidation state) that precipitated down to the ocean floor to form banded iron formations, thereby removing the oxygen (and the iron).
The rate of production of oxygen eventually exceeded the availability of reducing materials that removed oxygen, which ultimately led Earth to gain a strongly oxidizing atmosphere containing abundant oxygen (like the modern atmosphere). The modern sense of donating electrons is a generalization of this idea, acknowledging that other components can play a similar chemical role to oxygen.

View More On Wikipedia.org
  1. M

    2 part reducing sets 10mm to 15mm??

    Do any of you guys use this type of reducer? It doesn’t have an olive and the bottom part of the brass compresses onto the pipe by the looks of it and the top is removable. I haven’t used them before tbh. I can only seem to find the 3 part versions by me.
  2. S

    Pipes reducing Dishwasher depth

    Hi after some advice. I am buying a property - refurbished - they have put in a kitchen with space for a slimline dishwasher. There is sufficient height and width but the large plastic pipe behind redues the depth to 53cm when most freestanding machines are 60cm. I am worried this will stick out...
  3. M

    Best way of reducing rad. Valve to 10mm

    Which is the best way of reducing a rad. Valve down from 15mm to 10mm. A soldered reducer or an internal reducer?
  4. MDDIY2022

    Reducing diameter of rainwater drain pipe ?

    Hi everyone, I have an outdoor open drain which runs along the side of our house and then into an underground 5" pipe which takes the water away to the sewer. I want to pipe the open drain so that the water isn't exposed when it runs along the side of the house. Please see my attached diagram...
  5. J

    Can I improve flow rate by reducing diameter of a downpipe?

    Hi, I’m installing a down pipe which goes from the house to a waste water treatment tank. The length of the route is 55 meters and the pipe diameter is 125mm (which collects black water from 5 toilets, grey waters are on a separate pipe). For about 35 meters the pipe has a good inclination of...
  6. M

    vibrating cylinder reducing valve 'standard practice'?

    Hello, I have a new unvented system with a horizontal 210L Joule hot water cylinder. The cylinder has been vibrating badly which you can hear throughout the upstairs (it's in the loft). The manufacturers have stated that there is too much flow going into the cylinder, and that the gas...
  7. M

    Pressure reducing valve - can I remove?

    As part of full house renovation, I've switched from a conventional boiler/gravity fed tank to a combi boiler. Under the old system I note that a pressure reducing valve has been fitted to the pipework feeding the shower mixer (assuming as mains cold overpowering the supply pressure from the...
  8. B

    Remove reducing olives

    Hi. Can you tell me how to remove the reduce olives please
  9. D

    House pressure reducing valve cold water hammer

    Having issues with water hammer, I have a megaflo with balanced hot / cold using a heat stadia 3 bar prv, this seems ok as getting 3 bar at taps with test gauge, the outside tap is between the house incoming stop valve and the 3 bar PRV and that is showing just over 4.5 bar. If I switch a hot...
  10. D

    Megaflo Pressure Reducing Valve Clunking

    I have a loud clunking noise coming from the PRV when the cold water is shut off. It has been doing it for at least a year now but its getting annoying and I have noticed in the night (when the water pressure rises) I am getting random clunks from this valve after about 11pm at night. I am...
  11. M

    Pressure reducing valve on boosted hot water?

    Afternoon everyone I have gravity fed hot water - downstairs taps are 4.4m below tank. Upstairs 1.5m. The hot at the new minimum 0.3 bar monobloc kitchen tap is delivering a flow rate of just 4 L/min. So I am thinking about fitting a single impeller booster pump. This will be ideal for...
  12. P

    Pressure Reducing Valve

    Hi All, I've recently installed an unvented Andrews 270 litre gas-fired water heater in a ten-flat hmo and to reduce the chance of leaks I put in a pressure reducing valve. I went for the drop-tight design which is supposed to limit the pressure under no-flow conditions . . . except it doesn't...
  13. G

    Reducing 22mm pipe to 15mm

    Hi, We've recently had a pressurised hot water cylinder installed. When we use the kitchen tap it's quite a long run so the hot water takes a long time to run hot. I could fairly easily reduce about 7 metres of 22mm pipe down to 15mm (it already reduces to 15mm upstairs anyway before dropping...
  14. M

    By-pass valve for reducing heating loop

    Good day, I have question regarding by-pass valve for my combi compackt Hreco 36 primary loop. My primary loop is going from 3rd floor to the first floor ( floor heating) , at underfloor heating manifold I have by-pass valve. Recently I have installed Honeywell evohome system and every room is...
  15. E

    Will reducing pressure by using a device's valve hurt it over time?

    I have this valve. I can reduce the pressure by turning it half way closed. Will that hurt the valve over the long run? Thank you.
  16. P

    15-10 mm set.Hi, do I need to put a olive in a 15-10 mm reducing set. Thanks Paul

    Hi, do I need to put a olive in a 15-10 mm reducing set. Thanks Paul
  17. M

    Can you fit any pressure reducing valve/ multiblock on unvented.

    Assuming the pressures are the same can I fit a standard pressure reducing valve/ multiblock or do I have to fit manufacturers specific? At the moment i have a grant duowave with a megaflo multiblock but the block is leaking the grant one I can get in a couple of days but I can get a standard...
  18. D

    Caleffi pressure reducing valve

    I have a caleffi valve on my system. It has worked well for some 10 years. Recently I noticed it is not regulating, with no flow sits at mains pressure. With flow it regulates. Replaced cartridge but just the same. It is a Caleffi 5350, i.e a static regulator. Any ideas as to why performance has...
  19. R

    Pressure reducing valve - is this normal?

    Hi. Just been shown a job by an engineer friend who likes to mess around with things. He's fitted a pressure reducing valve to the supply pipe to a heated outbuilding. The mains pressure is 5 Bar, the valve has a gauge on it showing 2 Bar when taps are closed. He helps me out, so I don't...
  20. M

    Herz pressure reducing valve issues

    Hi one n all. I run maintenance for a building with 456 rooms in it. For each 2 rooms there is 1 riser with a PRV on the hot water supply. I'm constantly getting valves that seem to be sticking closed. In the 6 months since we opened, we've attended probably about 70 valves, and about 25 of them...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock