Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Main HE12 leak and humming in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
8
check this out. This is what you can see through the pilot light hole when the boiler humms. It's so loud and shuts itself down when it happens I have to reset it.

Also it's leaking from the heat exchanger.

 
I wouldn’t throw any money at it mate get a couple of engineers out to quote you for a new one
 
I’d suggest that boiler would have at least 2 years out of the box warranty if it’s only 2 years old do you have any installation paperwork?? Is the benchmark in the instruction manual completed
 

Reply to Main HE12 leak and humming in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...
Replies
2
Views
348
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
268
PSxxxxxx
P
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
264
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
253
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
313
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock