M
Melanie Gazey
We have a Glowworm betacom 30c combi-boiler coming the end of its second year. We had a glowworm engineer round yesterday as part of our guarantee because the hot water hasn't been working properly (heats up and then switches off every 30 seconds or so) unless the water is run at a fairly slow trickle.
He replaced a part in boiler but found that the gas pressure at the boiler (when hot run on full) is only 14mbs and should be 18mbs at least). He checked the pressure at the meter and said this was fine so advised that we have the pipes between the meter and boiler changed.
Does this sound a correct option? Hacving read other forums could there be a problem with the meter governor and would EDF energy (my supplier) come and check this free first?
Many thanks, Melanie
He replaced a part in boiler but found that the gas pressure at the boiler (when hot run on full) is only 14mbs and should be 18mbs at least). He checked the pressure at the meter and said this was fine so advised that we have the pipes between the meter and boiler changed.
Does this sound a correct option? Hacving read other forums could there be a problem with the meter governor and would EDF energy (my supplier) come and check this free first?
Many thanks, Melanie