Search the forum,

Looking to get back into the thick of it. Any advice?

Post new thread

Discuss Looking to get back into the thick of it. Any advice? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

TobiRolph

Good Morning Lads,

I need some advice if possible, I've been out of the game for maybe 7 years due to different reasons but now I want back in. I completed an apprenticeship and NVQ 2 but never got to progress further, but I've got the bug again. I realised that I'm under qualified and need to get back into the swing of things so maybe trying to do some free labouring etc with someone or do I go throught an intensive course to get back upto speed with the industry before trying for level 3.

Any advice is grateful.

Thanks
 
Status
Not open for further replies.

Reply to Looking to get back into the thick of it. Any advice? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
SimonG
SimonG
B
    • Friendly
Posting a thread as until now I've only read the forum
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
171
turnpin
turnpin
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
160
Lou
Lou
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
232
mutley racers
M
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Contractor Forum
Tiling Advice
Tiling Forum UK
Electrician Talk Forum
UK Tiling Forums
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock