Search the forum,

Log burner

Post new thread

Discuss Log burner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
stani

stani

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,505
Does anyone have an idea of the possible manufacturers of this stove?
image.jpgimage.jpg
 
I've just sent my dad a message asking for manufacturers details because it looks identical to his. It normally takes him half hour for a one word text response so watch this space!
 
Cheers APP one word at a time is good enough.lol
 
Hunter Herald 8. Double sided log burner.

He went into the loft to find the paperwork! Hahaha I hope it's the right one!
 
Thank your Dad from me anyway, will have a look now.
 
Looks like Hunter Herald 14.possibly early model without clean burn.
Having read above agree hunter 8
 
Last edited:
Just had look and emailed the pictures to them, that's the closest we've got to looking like the right one.
Thanks again. Stani.
 
Status
Not open for further replies.

Reply to Log burner in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
192
Thomas J Marshall
T
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
221
oz-plumber
O
C
Mira shower mixer adjustment.
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
224
cheddarman
C
W
Outdoor Tap at Porch
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Dave Moore
D
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
191
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock