Discuss Leaking Hansgrohe Bar Shower in the USA area at PlumbersForums.net

Messages
8
How do I get access to the flow cartridge in the Hansgrohe Bar Shower. It has the control with the 50% mark on the flow side. See attached photo - the end piece pops off but hard to see whether the small button should also come off to slide off the cover and reveal the cartridge
 

Attachments

  • 2021-08-06 15.11.57.jpg
    2021-08-06 15.11.57.jpg
    194.5 KB · Views: 33
There will be an screw in the end cap
 
Will remove the handle / control then you will have access to the cartridge
 
Yes but you don’t need to do that yet only when you remove the cartridge (just before)
 
Have you tried giving it a pull ?
 

Reply to Leaking Hansgrohe Bar Shower in the USA area at PlumbersForums.net

Similar plumbing topics

J
    • Like
I have an Arteform shower valve in my bathroom - top lever for the main shower head, middle for the handheld hose and bottom is the thermostatic...
Replies
1
Views
406
I installed a Bristan mixer bar shower about two and-a-half-years ago. I have recently noticed that immediately after the shower has been used, it...
Replies
1
Views
837
Deleted member 120897
D
hi all i got myself in a muddle. a friend of a friend came around at xmas to help me line up two copper pipes for shower bar install. the pipes...
Replies
21
Views
2K
  • Question
Hi. I have Charlton Mixer Tap in my shower i.e. thermostat and water control. I need to change the cartridge in the tap as it is dripping badly...
Replies
2
Views
982
We have located a leak from a shower enclosure...culprit is the riser bar, as soon as water is hitting the bar it's coming through into our...
Replies
1
Views
1K
Deleted member 120897
D

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock